Dell LATITUDE D400 User Manual download pdf (Page 16)

Back to Contents Page



Hard Drive

Removing the Hard Drive

Installing the Hard Drive

Removing the Interposer

Replacing the Interposer



Removing the Hard Drive



To remove the hard drive in the hard drive bay:

1. Follow the instructions in "Preparing to Work Inside the Computer" to remove the battery and prepare the computer for work.

2. Turn the computer over, and remove the two M3 x 3-mm screws.



3. Slide the hard drive out of the computer.



Installing the Hard Drive

CAUTION: If you remove the hard drive from the computer when the drive is warm, do not touch the metal housing of the hard drive.

CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE: To prevent data loss, turn off your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in

standby mode, or in hibernate mode.

NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.

NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

NOTICE: When the hard drive is not in the computer, store it in protective, antistatic packaging. See "Protecting Against Electrostatic Discharge" in your

System Information Guide.

M3 x 3-mm screws (2)

2864D

hard drive

See Mini RSL

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Comments to this Manuals

No comments

Dell LATITUDE D400 User Manual Page 16

Comments to this Manuals

Related products and manuals for Computer Accessories Dell LATITUDE D400