Dell POWEREDGE M1000E User Manual download pdf (Page 255)

Web Tools Administrator’s Guide 227

53-1001772-01

Active Directory service management

DRAFT: BROCADE CONFIDENTIAL

4. Click the up and down arrows to rearrange the order of the RADIUS servers.

5. Click Apply.

Removing a RADIUS server

Use the following procedure to remove a RADIUS server.

1. Open the Switch Administration window as described in “Opening the Switch Administration

window” on page 35.

2. Select the AAA Service tab.

3. Select a RADIUS server from the RADIUS Configuration list.

4. Click Remove.

If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the

only RADIUS server if RADIUS is the primary AAA service.

The RADIUS server is not deleted until you apply the changes from the AAA Services tab.

5. Click Apply in the AAA Services tab.

A confirmation displays, warning you that you are about to remove the selected RADIUS server.

6. Click Yes in the confirmation.

Active Directory service management

Active Directory is the directory server that holds all the user profiles. Active Directory provides user

authentication and authorization using LDAP as authentication protocol. Active Directory provides

better security while using remote authentication mechanism.

You can add, remove, and modify settings of Active Directory Server.

Enabling Active Directory service

For adding a new Active Directory server, you must provide the server IP address, port number,

secret string, timeout value, and LDAP as the authentication protocol. The server IP address may

be in either IPv4 or IPv6 format. Select Active Directory as the server type; the dialog box displays

LDAP as the only authentication protocol.

Use the following procedure to enable Active Directory service.

1. Open the Switch Administration window as described in “Opening the Switch Administration

window” on page 35.

2. Select the AAA Service tab.

3. To enable Active Directory service, select Active Directory from the Primary AAA Service menu.

4. Select None, Switch Database when Active Directory authentication failed, or Switch Database

when Active Directory timeout from the Secondary AAA Service menu.

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 309 310

No comments

Dell POWEREDGE M1000E User Manual Page 255