Dell PowerEdge VRTX User Manual download pdf (Page 4)

Figure 2. Extending the Feet of the Tower System

Optional — Rack Configuration

If you are using the optional rack configuration, assemble the rails and install the system in the rack following the safety

instructions and the rack installation instructions provided with your system.

NOTE: For more information on converting the system to rack mode, see the

Dell PowerEdge VRTX Owner's

Manual

at dell.com/poweredgemanuals.

Installing A Server Module

CAUTION: Install a blank in all empty server slots to maintain proper thermal conditions.

NOTE: The enclosure only supports Dell PowerEdge M520, M620, and M820 server modules that are specifically

configured for the enclosure, and can be identified by a label marked PCIe on the server module. If you install

PowerEdge M520, M620, or M820 server modules that are not configured for the enclosure, an error message is

displayed. For more information on configuring a server module for the enclosure, see the

Dell PowerEdge VRTX

Owner's Manual

at dell.com/poweredgemanuals.

NOTE: To install the M820 full-height server module(s), you must remove the server module partitions. For more

information, see the Owner’s Manual.

Figure 3. Installing a Server Module

Beginning with slot 1, slide the server modules into the enclosure. When a server module is securely installed, its handle

returns to the closed position.

1 2 3 4 5 6 7 8 9 ... 12 13

No comments

Dell PowerEdge VRTX User Manual Page 4