Autoloader Power Specifications
Autoloader Vibration Specifications
Autoloader Shock Specifications
Tape Drive Specifications
LTO3-080 SAS Drive Specifications
Media Capacity
Media Specifications
Back to Contents Page
60 Hz system: 90 – 265 VAC
50 Hz system: 90 – 265 VAC
60 Hz system: 4.0 A (RMS) for 115 VAC
50 Hz system: 2.0 A (RMS) for 230 VAC
60 Hz = 75 W (256 BTU/hr)
50 Hz = 80 W (273 BTU/hr)
0.26 Grms, 5 – 350 Hz (X, Y, Z) axes
1.54 Grms, 10 – 250 Hz (X, Y, Z) axes
31 G, 2.6 ms half-sine, 2 pulses (+/–) per axis, X, Y, Z
71 G, 2 ms half-sine, 2 shocks (+/–) per axis, X, Y, Z
Read/write transfer rate: maximum sustained
Noncompressed mode: 281.25 GB/hr
Compressed (2:1 typical): 562 GB/hr
Loading time to BOT
(for previously written tape)
> 100,000 cartridge load/unload cycles
Serial Attached SCSI (SAS)
LTO Ultrium 3 storage capacity
12800 GB (compressed) with 16 cartridges
LTO Ultrium 3 formatted capacity
400 GB (noncompressed)
800 GB (2:1 typical compression)
10.2 x 10.54 x 2.15 cm
(4 x 4.15 x .85 in)
LTO Ultrium 1, LTO Ultrium 2, LTO Ultrium 3
LTO Ultrium 2 and LTO Ultrium 3
>30yearswith<10%lossindemagnetization@20°C
40% RH (noncondensing)
1,000,000 passes (any point on the tape passing the recording head in either direction)
LTO Universal Cleaning cartridge life
Comments to this Manuals