Dell UPS 2700R User Manual download pdf (Page 7)

Introduction 1

Introduction

The Dell™ Environmental Monitoring Probe (EMP) is an optional connectivity device that lets you

remotely monitor the temperature, humidity, and status of two contact devices through a standard Web

browser, providing greater power management control and flexible monitoring.

Use the EMP with any Dell UPS equipped with a Dell Network Management Card

(firmware v01.10.xxxx or later).

NOTE: Download firmware updates for the Network Management Card from www.dellups.com.

Figure 1. The EMP

Features

The EMP has the following features:

• Hot-swappable feature simplifies installation by letting you install the probe safely without powering

down the card or critical UPS load.

• Monitors temperature and humidity information of any desired environment to protect your critical

equipment.

• Measures temperatures between 0 and 70

C with an accuracy of

• Measures relative humidity between 0 and 100% RH with an accuracy of

5%.

• Can be located away from the card with Ethernet cable up to 10m (33 ft) long.

• Monitors the status of two user-provided contact devices.

• Temperature, humidity, and contact closure status can be displayed through a Web browser, an

Internet-ready cell phone or PDA, or SNMP management software.

• User-selectable alarm thresholds let you to define acceptable temperature or humidity limits.

• E-mail notification through SMTP (simple mail transport protocol) using e-mail client software when

acceptable alarm limits are exceeded or contacts status changes.

• Changes in contact closure status are logged in the card’s Event History log.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Dell UPS 2700R User Manual Page 7