Dell Dimension 9100 User Manual download pdf (Page 38)



5. Remove the computer cover.



6. Remove any components that restrict access to the system board (CD/DVD drive(s), floppy drive, hard drive, I/O panel).



7. Remove the heat-sink assembly and processor.



8. Disconnect all cables from the system board.



9. Remove the 10 screws from the system board.



10. Slide the system board assembly toward the front of the computer, and then lift the board away.



11. Place the system board assembly that you just removed next to the replacement system board to ensure that it is identical.



Replacing the System Board



1. Gently align the board into the chassis and slide it toward the back of the computer.



2. Replace the screws on the system board.



3. Replace any components and cables that you removed from the system board.



4. Reconnect all cables to their connectors at the back of the computer.



5. Replace the computer cover.



6. Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page



system board

screws (10)

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

No comments

Dell Dimension 9100 User Manual Page 38