Dell OptiPlex 745c (Early 2007) User Manual

www.dell.com | support.dell.comDell™ OptiPlex™ 745c SystemsClient Systems ManagementAdministrator’s Guide

10 Client Systems Management Administrator’s Guide6Select Intel ME Firmware Local Update Qualifier. The default setting for this option is Always Open

Client Systems Management Administrator’s Guide 1110Return to the previous menu to exit the MEBx Setup and save AMT configuration. The system will dis

12 Client Systems Management Administrator’s Guide21Select SOL/IDE-R, and then select Y. A message window indicates that the system resets after confi

Client Systems Management Administrator’s Guide 13transactions, use TLS if the infrastructure is available. If you do not use TLS, then HTTP Digest wi

14 Client Systems Management Administrator’s GuidebInserts the USB drive key into a platform.cTurns on that platform.6The system BIOS detects the USB

Client Systems Management Administrator’s Guide 15The AMT WebGUI is accessible from any web browser, such as Internet Explorer or Netscape.Limited rem

16 Client Systems Management Administrator’s Guide

Client Systems Management Administrator’s Guide 17UnprovisioningUnprovisioning is when Intel® AMT has been returned to its default settings.Return to

18 Client Systems Management Administrator’s GuideLAN Controller EnabledIntel ME Features Control• Manageability Feature Selection• Intel Quiet System

Client Systems Management Administrator’s Guide 19

Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates

20 Client Systems Management Administrator’s Guide

Contents 3Contents1 IntroductionAdvantages of the OptiPlex 745c With iAMT Technology . . . . . . . . . . . . 52 Setup and ConfigurationAMT Setup and

4 Contents

Client Systems Management Administrator’s Guide 5IntroductionYour Dell™ OptiPlex™ 745c system is designed to simplify system management and reduce IT-

6 Client Systems Management Administrator’s Guide

Client Systems Management Administrator’s Guide 7Setup and ConfigurationAMT must be setup and configured in a system before use. AMT setup readies the

8 Client Systems Management Administrator’s GuideFactory-default state is a fully unconfigured state, in which security credentials are not yet establ

Client Systems Management Administrator’s Guide 9Password GuidelinesMEBx passwords must meet minimum criteria. The following restrictions are enforced