Dell OptiPlex GX100 User Manual download pdf (Page 95)

To lock the system password, you must first assign a setup password in Setup Password and then change the Password Status option to

Locked. When Setup Password has a password assigned and Password Status is set to Locked, the system password cannot be changed

through the System Password option and cannot be disabled at system start-up by pressing <Ctrl><Enter>.

To unlock the system password, you must enter the setup password in Setup Password and then change the Password Status option to

Unlocked. When the option is set to Unlocked, you can disable the system password at system start-up by pressing <Ctrl><Enter>. Then change

the password through the System Password option.

Setup Password

Setup Password lets you restrict access to System Setup in the same way that you restrict access to your system with the system password

feature. The settings are:

l Not Enabled (the default)

l Enabled

l Disabled by Jumper

Chassis Intrusion

Chassis Intrusion displays the status of the system chassis intrusion monitor and can be set to Enabled, Enabled-Silent, or Disabled. The

default is Enabled.

If the computer cover is removed while the intrusion monitor is set to Enabled, a Desktop Management Interface (DMI) event is generated, the

setting changes to Detected, and the following message appears during the boot routine at the next system start-up:

Alert! Cover was previously removed.

If the computer cover is removed while the intrusion monitor is set to Enabled-Silent, a DMI event is generated and the setting changes to

Detected, but the alert message does not appear during the boot sequence at the next system start-up.

If the intrusion monitor is set to Disabled, no intrusion monitoring occurs and no messages appear.

To reset the Detected setting, enter System Setup during the system's POST. In the Chassis Intrusion option, press the left- or right-arrow key to

select Reset, and then choose Enabled, Enabled-Silent, or Disabled.

CPU Serial Number

CPU Serial Number determines whether the microprocessor serial number (if any) is provided to programs that request it. When Enabled is

selected, the system provides the microprocessor serial number to programs that request it. When Disabled is selected, the system never

provides the microprocessor serial number.

System Time

System Time resets the time on the computer's internal clock.

Time is kept in a 24-hour format (hours:minutes:seconds). To change the time, press the left- or right-arrow key to select a field, and then press

plus (+) or minus (–) to increase or decrease the number. If you prefer, you can type numbers in each of the fields.

ZIP Floppy Support

ZIP Floppy Support enables or disables the support of Advanced Technology Attachment Packet Interface (ATAPI) Zip devices by the system

BIOS. When Enabled is selected, ATAPI Zip devices are supported as diskette drives, and the first Zip device is listed as a bootable device

under Boot Sequence. When Disabled is selected, the system BIOS ignores ATAPI Zip devices, though the operating system may still support

them.

Back to Contents Page

NOTE: See "Using the Setup Password Feature" for instructions on assigning a setup password and using or changing an existing

setup password. See "Disabling a Forgotten Password" for instructions on disabling a forgotten setup password.

NOTE: When the setup password is enabled, you must know the setup password before you can reset the Chassis Intrusion option.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 106 107

No comments

Dell OptiPlex GX100 User Manual Page 95