Dell OptiPlex GX240 User Manual Page 158

  • Download
  • Add to my manuals
  • Print
  • Page
    / 283
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 157
Solving Problems 161
If the problem still exists after you complete the basic checks, fill out the
Diagnostics Checklist as you perform the following steps:
1 Turn off nearby fans, lights, lamps, or other electrical devices.
Are the external speakers functioning properly?
Yes. One or more of those electrical devices was causing interference.
The problem is resolved.
No. Go to step 2.
2 Enter system setup and make sure that Sound under the Integrated
Devices option is set to On. Then exit system setup properly to save
the information, and reboot the computer.
Is the device working properly?
Yes. The problem is resolved.
No. Go to step 3.
3 Run the Misc. PCI Devices tests in the Dell Diagnostics.
Did the tests complete successfully?
Yes. The controller is functioning properly. If the problem persists,
contact Dell for technical assistance.
No. Contact Dell for technical assistance.
Printer Problems
Basic Checks:
Disconnect the cable from the computer and check the cable
connector for bent or broken pins. Check for damaged or frayed cables.
If the cable is not damaged, make sure that it is firmly connected to
the computer.
Test the electrical outlet: verify that the printer is connected to a
working electrical outlet.
Ensure that the printer is turned on.
Check for interference: electrical appliances on the same circuit or
operating in close proximity to the computer can cause interference.
Refer to the documentation that came with the printer for the correct
parallel port mode. Enter system setup and verify that the appropriate
mode is selected in the Integrated Device menu.
Page view 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 282 283

Comments to this Manuals

No comments