Dell XPS 710 User Manual download pdf (Page 47)

Removing and Installing Parts: Dell XPS 700 Service Manual

parts.htm[4/11/2014 11:32:11 AM]

7. Replace the computer cover (see Replacing the Computer Cover).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

8. Connect the computer and devices to electrical outlets, and turn them on.

Installing a Floppy Drive

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Remove the drive panel (see Removing the Drive Panel).

4. Remove the existing floppy drive, if applicable (see Removing a Floppy Drive).

5. If no screws are attached to the new floppy drive, check the inside of the drive panel for shoulder screws. If screws are

present, attach the screws to the new drive.

1 floppy drive 2 shoulder screws (4)

Slide the floppy drive into the drive bay until it clicks into place.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

No comments

Dell XPS 710 User Manual Page 47