Dell PowerVault 745N User Manual download pdf (Page 10)

NOTICE: Failure to disconnect all external storage enclosures from your NAS

system before performing a system reinstallation may lead to data loss.

Disconnect all external storage enclosures from your NAS system prior to

continuing with this procedure.

NOTE: During reinstallation, you must use NIC 1 to connect the NAS system

to a network that includes your client system or directly to the client system.

NOTE: Turn off any external storage enclosures attached to your system.

3. Disconnect all external storage enclosures from your NAS system.

4. Insert the prepared USB Key into one of the USB connectors on the

PowerVault 745N.

5. Turn on the NAS system.

NOTE: There are three (3) USB connectors on the PV745. One (1) connector

is located under the front panel bezel and two (2) are located on the back

panel.

Initial Release: 2 January 2007

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Dell PowerVault 745N User Manual Page 10