Dell 15R SE (7520) Owner's Manual download pdf (Page 37)

Display Assembly | 37

Replacing the Display Assembly

Procedure

1 Place the display assembly in position and replace the screws that secure the

display assembly to the computer base.

2 Route the display cable through the routing guides and connect the display cable

to the connector on the system board.

3 Adhere the tape that secures the display cable to the system board.

4 Connect the antenna cables to the connectors on the Mini-Card.

Postrequisites

1 Replace the palm rest. See "Replacing the Palm Rest" on page 31.

2 Replace the base cover. See "Replacing the Base Cover" on page 18.

3 Replace the keyboard. See "Replacing the Keyboard" on page 16.

4 Replace the battery. See "Replacing the Battery" on page 13.

5 Follow the instructions in "After Working Inside Your Computer" on page 9.

Removing the Display Bezel

Prerequisites

1 Remove the battery. See "Removing the Battery" on page 13.

2 Remove the keyboard. See "Removing the Keyboard" on page 15.

3 Remove the base cover. See "Removing the Base Cover" on page 17.

4 Remove the palm rest. See "Removing the Palm Rest" on page 27.

5 Remove the display assembly. See "Removing the Display Assembly" on page 35.

book.book Page 37 Thursday, April 12, 2012 10:14 AM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

No comments

Dell 15R SE (7520) Owner's Manual Page 37