Dell Latitude D505 User Manual download pdf (Page 29)

Back to Contents Page

Microprocessor Module

Dell™ Latitude™ D505 Service Manual

Removing the Microprocessor Module

CAUTION: Before performing the following procedures, read the safety instructions in your Product

Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Do not touch the processor die. Press and hold the microprocessor down on the substrate on which the die is

mounted while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.

NOTICE: To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the

microprocessor when turning the cam screw.

1. Follow the instructions in "Preparing to Work Inside the Computer

2. Remove the keyboard

NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the

microprocessor thermal-cooling assembly. The oils in your skin reduce the heat transfer capability of the thermal pads.

3. Remove the microprocessor thermal-cooling assembly

NOTICE: When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on

the microprocessor module.

4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise

until it comes to the cam stop.

1 pin-1 corner

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

No comments

Dell Latitude D505 User Manual Page 29