Dell Latitude XT2 (Early 2009) User Manual download pdf (Page 63)

Hinge Cover

Dell™Latitude™XT2ServiceManual

Removing the Hinge Cover

Replacing the Hinge Cover

Removing the Hinge Cover

1. Follow the procedures in Before Working Inside Your Tablet-PC.

2. Turn the computer top-side up, and then open the display all the way (180 degrees) so that it rests on your work surface.

3. Insert a plastic scribe or flathead screwdriver into the slot and gently pry up the hinge cover on the right side to release.

4. Ease the hinge cover up, moving from right to left, and remove it.

WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back

panel of the computer.

CAUTION: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 84 85

No comments

Dell Latitude XT2 (Early 2009) User Manual Page 63