Dell XPS 11 Service Manual download pdf (Page 23)

Replacing the Display Assembly | 23

Replacing the Display Assembly

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in

"Before Working Inside

Your Computer" on page 5. After working inside your computer, follow the

instructions in "After Working Inside Your Computer" on page 7.

For more safety best practices, see the Regulatory Compliance home page at

dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the display hinges with the screw holes on the

palm-rest assembly.

2 Replace the screws that secure the display hinges to the palm-rest assembly.

3 Slide the webcam cable into the system-board connector and press down on the

connector latch to secure the cable.

4 Connect the display cable to the system board.

5 Connect the antenna cables to the wireless card.

6 Adhere the conductive and Mylar tapes to the antenna cables.

7 Turn the computer over.

8 Rotate the palm-rest assembly to an angle of 180 degrees.

Postrequisites

1 Replace the battery. See "Replacing the Battery" on page 12.

2 Replace the base cover. See "Replacing the Base Cover" on page 10.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

No comments

Dell XPS 11 Service Manual Page 23