Dell 5230N User's Guide download pdf (Page 179)

Replace the transfer roller if the defects occur every:

58.7 mm (2.31 in.)

Replace the photoconductor if the defects occur every:

44 mm (1.73 in.)

Replace the fuser if the defects occur every:

• 78.5 mm (3.09 in.)

• 94.2 mm (3.71 in.)

Skewed print

These are possible solutions. Try one or more of the following:

CHECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

CHECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Solid black or white streaks appear on transparencies or paper

These are possible solutions. Try one or more of the following:

ENSURE THAT THE FILL PATTERN IS CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

CHECK THE PAPER TYPE

• Try a different type of paper.

• Use only the recommended transparencies.

• Ensure that the Paper Type setting matches what is loaded in the tray or feeder.

• Ensure that the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or

feeder.

ENSURE THAT THE TONER IS DISTRIBUTED EVENLY WITHIN THE TONER CARTRIDGE

Remove the toner cartridge and shake it from side to side to redistribute the toner, and then reinstall it.

Troubleshooting

179

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 192 193

No comments

Dell 5230N User's Guide Page 179