Dell 9010 Owner's Manual download pdf (Page 24)

Removing the Processor

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Remove the heat sink.

4. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor

cover and remove the processor from the socket, and place it in antistatic bag.

Installing the Processor

1. Insert the processor into the processor socket. Ensure the processor is properly seated.

2. Gently lower the processor cover.

3. Press the release lever down and then move it inward to secure it with the retention hook.

4. Install the heat sink.

5. Install the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the System Fan

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Press the clip to release and disconnect the system fan cable from the system board.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

No comments

Dell 9010 Owner's Manual Page 24