Dell Alienware Area-51 Service Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 133
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
Replacing the Multiple
Graphics Cards
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer.
After working inside your computer, follow the instructions
in After Working Inside Your Computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Locate the graphics (PCI-Express x16 (SLOT5)) connector on the system
board. For more information on the graphics connector, see “System Board
Components”.
2 Align the graphics card with the PCI-Express x16 card connector (SLOT5) on
the system board.
3 Place the card in the connector and press down firmly. Ensure that the
card is firmly seated in the slot.
NOTE: Repeat steps 2 to 3 to install graphics card on the PCI-Express
x16 card connector (SLOT3) and PCI-Express x16 card connector
(SLOT1).
4 Replace the screws that secure the graphics card to the chassis.
5 Connect the graphics bridge that connects the graphics cards.
6 Connect the power cables to the graphics card.
NOTE: The location of the power supply connector varies depending
on the video card installed.
7 From outside the chassis, push the screw covers inside to cover the screws
that secure the graphics card.
Post-requisites
1 Replace both the left and right side-panels. See “Replacing the Side
Panels”.
2 Replace the stability foot.
74
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 132 133

Comments to this Manuals

No comments