Dell PowerConnect B-DCX-4s User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Flow Vision Administrator’s Guide 3
53-1002999-01
Flows
1
When creating or viewing a flow, you can specify any combination of the three features in the flow
command. For example:
flow --create flowname -feature monitor,generator <parameters>
flow --show flowname -feature mirror,generator <parameters>
Flow definition rules
The rules listed in Table 1 identify what parameters can be used to define a flow.
Supported port configurations
Table 2 lists the supported configurations for each Flow Vision feature using only the basic flow
identification parameters (ingrport and srcdev, egrport and dstdev).
If you are using at least one advanced parameter (lun, -frametype, or -bidir), then feature-specific
rules apply. Refer to the individual Flow Vision features for specific details.
NOTE
Neither ranges nor lists are supported for any parameter.
TABLE 1 Flow definition rules
Parameters Field names Rules
Port ingrport
egrport
One field only must be specified
Values must be explicit
Frame srcdev
dstdev
lun
frametype
1
1. Refer to Table 3 for more information on frame types.
At least one field must be specified
Values for srcdev and dstdev can be explicit or “*” (“*indicates learned flows)
Values for lun and frametype must be explicit
TABLE 2 Port configurations supported in Flow Vision
Feature Platforms Switch Configuration Mode
16 Gbps-capable
Fibre Channel
1
1. 16Gbps-capable platforms include the Brocade FC8-32E and FC8-48E blades.
8 Gbps-capable Fibre Channel Access Gateway Virtual Fabric
Flow Generator
Supported (SIM-Ports only) Supported
(Destination SIM-Ports only)
Not Supported Supported
Flow Mirror
Supported (F_Ports only) Not Supported Not Supported Supported
Flow Monitor
Supported (E_Ports.
EX_Ports, and F_Ports only)
Supported (F_Ports only) Supported
(F_Ports only)
Supported
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comments to this Manuals

No comments