Back to Contents Page
AGP Card
YourDell™computerprovidesaconnectorforanAGPcard.
1. Shut down the computer through the Start menu.
2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
3. Disconnect any telephone or telecommunication lines from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
5. Remove the computer stand, if it is attached.
6. Open the computer cover.
Removing an AGP Card
1. Remove the filler bracket by raising the hinged lever and sliding the filler bracket up.
2. Slide the card clip toward the front of the computer until the tab is out of the notch on the card.
3. Pull the card up and out of the AGP connector.
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
Comments to this Manuals