Dell™ PowerEdge™ 750 Adapter Installation Guide This adapter allows you to connect your WebReboot to the Dell™ PowerEdge™ 750 server, which does
Installation 15 Figure 16 - Ensuring that the Adapter Board is Properly Aligned with the Front Panel Board 8. If you have any surplus Motherboar
Installation 17 11. Connect the server to your WebReboot using the instructions in the WebReboot User’s Guide. 12. Configure the WebReboot ports f
Servprise International, Inc. 447 Rawson Street Leicester, MA 01524 USA *MANDPE75001*
WebReboot™ Dell™ PowerEdge™ 750 Adapter Installation Guide Copyright 2006. Servprise International, Inc. All rights reserved. Dell™,
Product Description 1 Product Description The Dell™ PowerEdge™ 750 Adapter allows you to connect your servers that don’t contain power pins to the
Installation 3 Installation Preparation 1. Before proceeding with the installation, ground yourself with a suitable anti-static wrist strap to re
Installation 5 Option 2 - Installation Without Using a PCI Slot The Direct Motherboard Cable can be used to connect the WebReboot to a server if
Installation 7 Figure 5 – Internal View of PCI Slot Cover Adapter 3. Connect one end of the Motherboard Cable to the MBoard Pins port on the Ext
Installation 9 3. To install the Direct Motherboard Cable, route the smaller black connector through one of the available holes, as shown in Figu
Installation 11 2. Remove the ribbon cable from the front panel board by gently pulling it. Figure 11 – Ribbon Cable Removed from Front Panel Bo
Installation 13 4. Attach the Motherboard Cable that was routed through the chassis to the Power port on the Dell™ PowerEdge™ 750 Adapter, as sho
Comments to this Manuals