46 Dell Inspiron 7500 — Removing and Replacing Parts
Latch Assembly Removal
Figure 37. Latch Assembly Components
To remove the latch assembly (see Figure 36), perform the following steps:
1. Disconnect the LED cable from connector JP2 on the LED board.
2. Remove the 4-mm screw securing the LED board to the plastic base.
3. Remove the LED board.
4. Remove the two 4-mm screws holding the latch cover for the MegaBay and
media bay.
5. Remove the latch cover.
6. Remove the center lock over the two latches with springs.
1
Springs (2)
2
Latches (2)
3
Center lock
4
Latch cover
5
4-mm screws (3)
6
LED board
7
LED cable
Comments to this Manuals