Dell Z9000 Specifications download pdf (Page 8)

6 Installing the Hardware

Install chassis into rack or cabinet

Attach a Ground Cable

Use a single M4x0.7 screw for attaching a ground cable to the chassis. The cable

itself is not included. Dell Force10 recommends a 6AWG one-hole lug, #10 hole

size, 63" spacing (not included in shipping) to properly ground the chassis. The

one-hole lug must be a UL recognized, crimp-type lug.

NOTE: The rack installation ears are not suitable for grounding.

CAUTION: Grounding conductors must be made of copper. Do not use

aluminum conductors.

2 Attach the brackets to the sides of the chassis on either side, using four

screws for each bracket.

Attach the bracket so that the “ear” faces to the outside of the chassis.

Step Task

1 Dell Force10 recommends that one person hold the Z9000 chassis in

place while a second person attaches the brackets to the posts.

2 Attach the bracket "ears" to the rack or cabinet posts, using two screws

for each bracket. Ensure the screws are tightened firmly. The example

here shows the mounting on the I/O side, but either side can be used.

Step Task

Rack/Cabinet

Post

Rack/Cabinet

Mounting Ears

I/O side

View from I/O side

Connect to

rack/cabinet

(ears)

View from PSU side

Screws

Connect to

rack/cabinet

(ears)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Dell Z9000 Specifications Page 8