Dell PowerEdge C6105 Technical Information download pdf (Page 13)

Front Panel User Interface

The BMC provides control panel interface functionality including indicators

(fault, status, and ID LEDs) and buttons (power/ID).

Power Button

The power button turns the device on and off.

ID Button

The control panel Chassis Identify button toggles the state of the Chassis ID

LED. If the ID LED is off, pressing the button turns the LED on (blinking).

If the LED is on, pressing the button or an IPMI Chassis Identify command

turns the LED off.

LEDs

BMC Heartbeat LED

The green LED provides an easy way to indicate that BMC is now enabled.

ID LED

A blinking LED indicates the Chassis Identify command has been accepted.

System Status LED

There is a dual-color LED to show the system status. The BMC turns the

LED off after all event logs are cleared.

The behavior of Status LED and ID LED is listed in Table 1-2.

Table 1-2. LED Status

LED Color Status When

Status LED Amber Blinks See "Blinking Health LED

Conditions" on page 14.

Off Normal status

Green On Amber LED is off

Blinks Amber LED is blinking

Off DC off

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

No comments

Dell PowerEdge C6105 Technical Information Page 13