Dell Metered Rack Power Distribution Unit User's Guide download pdf (Page 42)

LCD Operation

Table 10. Alarms , Notices, and Events (Fortsetzung)

Name TypeDescription

Fatal EEPROM Fault This alarm occurs when the EEPROM experiences a

Range Check Failure alarm, an incorrect EEPROM

model map alarm, or an EEPROM Checksum Failure

alarm.

Generates an alarm and is logged in the Event Log.

Alarm

PDU Control Power ON The rPDU processor is powered on.

Logged in the Event Log only.

Event

Event Log

The Event Log holds up to 50 alarms, events, and most notices. They are logged when they occur. You can scroll

through the event screens, beginning with the most recent event.

The first row of each event screen contains the date (MM/DD/YYYY) and time (hh:mm:ss) at which the event

occurred. The second row contains the type of event and code. The event description begins on the third row

and may continue to the fourth row.

The bottom right corner of the event screen displays two numbers—an ordering number of the event in the log,

followed by the total number of events in the log.

If there are no events in the log, the screen displays “No events in log.”

Retrieving the Event Log

To retrieve the logged events:

1 From the Main menu, use the or buttons to navigate to the Events Log menu.

2 Press the button for longer than one second to see the logged events.

3 Use the or buttons to navigate forward or back to review the events, notices, and alarms in the order

they occurred.

4 To exit any screen and return to the previous menu level, press the button for longer than one second.

Figure 26. Example Event Log Displays

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 89 90

No comments

Dell Metered Rack Power Distribution Unit User's Guide Page 42