Dell POWEREDGE R515 Specifications download pdf (Page 34)

Dell

PowerEdge R515 Technical Guide

8.2 Supported ACPI States

The following ACPI states are supported:

 ACPI compliance: S0, S4, S5

 NO S1, S2, S3 (STR)

State S4 is supported by the OS only.

8.3 Power Management Modes

8.3.1 Dell Active Power Controller

The Dell Active Power Controller (DAPC) is implemented in system BIOS and uses hardware level counters,

etc., to determine hardware utilization. The BIOS uses this information to determine when to change the

processor’s operating frequency. The DAPC is OS independent and means that the OS no longer has control.

This provides a consistent power management solution regardless of the installed OS. Some OS(s),

particularly hypervisors, do not support power management, thus DAPC provides a solution when there

otherwise would not be one.

8.3.2 Power Saving BIOS Setting (OS Control)

With the Power Saving BIOS setting, the OS monitors process/thread level utilization of the processor and

uses processor controls to change the processor’s operating frequency. For heavy workloads, the OS will run

the processor at higher frequencies for additional performance. Lighter workloads do not need high

performance, thus the OS will run the processor at lower frequencies.

8.3.3 Maximum Performance

The Maximum Performance mode disables power management. In this mode, the processor frequency is

statically set to the highest supported frequency.

The power management features are implemented via two categories: fixed or generic.

Fixed features use bits defined in the ACPI specification for specific capabilities. The fixed-feature bits give

the OS complete control over the power management of a device, since the location of the bits is given to

the OS in the FACP table. Thus, a driver can directly access bits to control a device’s power management.

Generic features have defined enable and status bits, but the functionality is not fully visible to the OS. Dell

provides ASL code to handle the details of generic features, allowing the OS to intelligently communicate

with system-specific hardware. Table 12 summarizes power management features, and Table 13 describes

the possible power profiles.

Table 12. BIOS Power Management Features

Feature

Type

Enable/Status/

Ctrl bit

location

Description

ACPI Mode

Switch

Fixed

PCH

The OS uses the SCI_EN bit to switch from legacy mode to

ACPI mode.

Sleep States

Fixed

PCH

Supported states: S0 (Working), S4-OS (Hibernation in

Microsoft

Windows

2000), and S5 (soft-off).

Not supported: S1 (standby or suspend) and S3.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Comments to this Manuals

No comments

Dell POWEREDGE R515 Specifications Page 34

Comments to this Manuals

Related products and manuals for Servers Dell POWEREDGE R515