Dell SE198WFP User Manual download pdf (Page 26)

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.



This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to

use.SeeSpecificationsfortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis1440X900@60Hz.



Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.

See Solving Problems for more information.

Setting the Optimal Resolution

1. Right-click on the desktop and select Properties.

2. Select the Settings tab.

3. Set the screen resolution to 1440 x 900.

4. Click OK.

If you do not see 1440 x 900 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following

procedures.

If you have a Dell desktop or portable computer:



NOTE:If you select 'disable' for DDC/CI,a warning message as shown in the picture above appears on the screen.Then you

can select Yes or No according to need.

1 : Auto Detect (Analog Input)

Cannot Display This Video Mode

Optimum Resolution 1440 x900 60Hz

or



1 : Auto Detect (Digital Input)

Cannot Display This Video Mode

Optimum Resolution 1440 x900 60Hz

2: Analog Input

Cannot Display This Video Mode

Optimum Resolution 1440 x900 60Hz

or



3:Digital Input

Cannot Display This Video Mode

Optimum Resolution 1440 x900 60Hz

NOTE: The floating Dell Self-testFeatureCheckdialogappearson-screenifthemonitorcannotsenseavideosignal.

or

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Dell SE198WFP User Manual Page 26

Comments to this Manuals

Related products and manuals for TVs & monitors Dell SE198WFP