Dell Precision M60 Technical Information download pdf (Page 12)



Display Bezel



1. Follow the instructions in "Preparing to Work Inside the Computer."

2. Remove the central control cover.

3. Remove the display assembly.

4. Use a plastic scribe to pry the eight display bumpers out of the screw holes located on the front of the bezel.

5. Remove the eight M2.5 x 6-mm screws located on the front of the bezel.



6. Startingatthebottomofthedisplaypanel(bytheDell™logo),useyourfingerstoseparatethebezelfromthetopcoverbyliftingtheinsideedgeof

the bezel away from the top cover.

Display Panel

display

display cable connector

computer base

pull-tab

connector

display bumpers (8)

display panel

M2.5 x 6-mm screws (8)

top cover

display bezel

M2 x 3-mm screws (9)

CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.