Dell PowerEdge C8000 User Manual download pdf (Page 12)

12 Installation Guide

Remove the four M3 screws securing the mounting brackets.

Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.

Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.

NOTE: Be careful not to damage the twin axial cable on the back GPGPU card riser

when removing the top cover.

Figure 1-12. Removing the Mounting Brackets and GPGPU Blank

NOTE: Ensure that the back GPGPU card riser is secured to the sled cover using

the type A screw holes.

Align the right air baffle with the screw holes on the back of the sled cover.

Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to

5.21 in-lb.

Figure 1-13. Installing the Right Air Baffle

1 M3 screws (4) 2 front mounting bracket

3 back mounting bracket 4 GPGPU blank

1 M3 screws (2) 2 right air baffle

C8220X_MIC5110P7120P_IG.book Page 12 Monday, August 12, 2013 5:42 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Dell PowerEdge C8000 User Manual Page 12