Dell Dimension 9100 User Manual download pdf (Page 107)

Appendix 107

System Setup

Overview

Use system setup as follows:

• To change the system configuration information after you add, change, or remove any

hardware in your computer

• To set or change a user-selectable option such as the user password

• To read the current amount of memory or set the type of hard drive installed

Before you use system setup, it is recommended that you write down the system setup screen

information for future reference.

NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain

changes can make your computer work incorrectly.

Environmental

Temperature:

Operating 10° to 35°C (50° to 95°F)

Storage –40° to 65°C (–40° to 149°F)

Relative humidity 20% to 80% (noncondensing)

Maximum vibration:

Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min

Storage 0.5 G at 3 to 200 Hz at 1 octave/min

Maximum shock:

Operating bottom half-sine pulse with a change in velocity of 20 inches/sec

(50.8 cm/sec)

Storage 27-G faired square wave with a velocity change of 200 inches/sec

(508 cm/sec)

Altitude:

Operating –15.2 to 3048 m (–50 to 10,000 ft)

Storage –15.2 to 10,668 m (–50 to 35,000 ft)

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 139 140

No comments

Dell Dimension 9100 User Manual Page 107