Dell OptiPlex 960 (Late 2008) User Manual download pdf (Page 122)

e. Remove the three shoulder screws from the inside of the drive bay insert, and install them onto the media card reader.

f. Remove the hard drive and shroud assembly (see Removing the Hard Drive and Shroud Assembly).



3. Align the screws on the media card reader with the bracket slots in the computer, and gently move the drive forward until it clicks into place.



4. Connect the media card reader cable to the connectors on the media card reader and internal USB connector on the system board (see System Board

Components).



5. Replace the optical drive (see Installing an Optical Drive).



6. Replace the hard drive and shroud assembly (see Replacing the Hard Drive and Shroud Assembly).



7. Check all cable connections.



8. Check cable routing. Route cables through the cable guides to ensure proper airflow through the fan and cooling vents.



9. Perform the procedure After Working on Your Computer.



10. See the documentation that came with the drive for instructions on installing any software required for drive operation.

media card reader

screws (3)

bracket rails (3)



media card reader data cable

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 145 146

No comments

Dell OptiPlex 960 (Late 2008) User Manual Page 122