Dell OptiPlex XE2 (Mid 2013) User Manual download pdf (Page 27)

Installing the Coin-Cell Battery

1. Place the coin-cell battery into its slot on the system board.

2. Press the coin-cell battery downward until the release latch springs back into place and secures it.

3. Install the:

a) drive cage

b) front bezel

c) cover

4. Follow the procedures in

After Working Inside Your Computer

Removing the Heat Sink Assembly

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover

3. Using both hands, push away the two release handles while lifting the heat sink shroud upward and off the

computer.

4. Disconnect the heat-sink assembly cable from the system board.

5. Loosen the captive screws, lift the heat sink assembly and then remove it from the computer.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Owner's Manual 1
Notes, Cautions, and Warnings 2
Contents 3
Working on Your Computer 5
Turning Off Your Computer 6
Recommended Tools 7
System Overview 7
Removing the Cover 8
Installing the Cover 9
Removing the Front Bezel 9
Installing the Front Bezel 10
Installing the Expansion Card 13
Installing the WLAN Card 14
Removing the Optical Drive 14
Installing the Optical Drive 15
Removing the Drive Cage 15
Installing the Drive Cage 16
Installing the Hard Drive 17
Removing the Hard Drive 17
Removing the Speaker 18
Installing the Speaker 18
Removing the Intrusion Switch 19
Memory Module Guidelines 19
Removing the Memory 20
Installing the Memory 20
Removing the System Fan 20
Installing the System Fan 21
Removing the Power Switch 22
Installing the Power Switch 22
Removing the Power Supply 24
Installing the Power Supply 26
Installing the Heat Sink 28
System Board Components 29
Removing the System Board 29
Installing the System Board 30
System Setup 31
System Setup Options 32
Boot Support 33
Table 4. Security 34
System Password 35
Computrace Service 35
Absolute Software 35
Table 5. Performance 36
Table 6. Power Management 36
Table 7. POST Behavior 37
Table 9. Maintenance 38
Table 10. Image Server 38
Updating the BIOS 39
Jumper Settings 40
System and Setup Password 40
Disabling a System Password 41
Setting up a System Password 42
Diagnostics 43
Troubleshooting Your Computer 45
Beep Code 46
Error Messages 46
Specifications 51
Table 18. Network 52
Table 19. System Information 52
Table 20. Expansion Bus 52
Table 21. Cards 52
Table 22. Drives 52
Table 23. External Connectors 53
Table 24. Controls and Lights 53
Table 25. Power 54
Table 26. Physical Dimension 54
Table 27. Environmental 54
Contacting Dell 56

Comments to this Manuals

No comments

Dell OptiPlex XE2 (Mid 2013) User Manual Page 27

Comments to this Manuals

Related products and manuals for Computers Dell OptiPlex XE2 (Mid 2013)