4. Install:
a. base cover
b. battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
3. Perform the following steps:
a. Disconnect the coin-cell battery cable from the system board.
b. Pry and remove the coin-cell battery from the adhesive.
Installing the Coin-Cell Battery
1. Place the coin-cell battery on the system board with adhesive side downwards.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a. base cover
b. battery
4. Follow the procedures in After Working Inside Your Computer.
Removing the Display Hinge
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
c. keyboard trim
d. keyboard
3. Perform the following steps:
a. Remove the screws that secure the display hinge at the front and back of the computer.
b. Lift and remove the display hinge from the computer.
21
Comments to this Manuals