If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in Before You Begin.
2. Remove the battery. See Replacing the Battery.
3. Loosen the captive screw and remove the card cover from the computer.
4. Pull the card out of the compartment so that you can disconnect the card from its cable and remove it from the computer.
5. To replace the card, connect the card to the cable and then carefully insert it into the compartment.
6. Replace the card cover and tighten the screw.
7. Replace the battery.
Back to Contents Page
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Comments to this Manuals