Dell Latitude C800 User Manual download pdf (Page 40)

38 Removing and Replacing Parts

www.dell.com | support.dell.com

NOTICE: Hold the microprocessor down while turning the cam lock screw to

prevent intermittent contact between the cam lock screw and microprocessor

(see “Microprocessor Cam Lock Screw”).

Tighten the cam lock screw.

NOTICE: Do not over- or undertighten the screw. Tighten it until the screw

indicator points to the “closed” or “locked” indicator on the socket.

Replace the microprocessor thermal cooling assembly.

Closing the Microprocessor Retaining Clip

While pressing lightly down on the center of the retaining clip, insert a

flat-blade screwdriver into the latch mechanism and pivot the top of

the screwdriver away from the clip to close the latch.

Video Graphics Board

NOTICE: Disconnect the computer and attached devices from electrical

outlets and remove any installed batteries.

64mcwc11.book Page 38 Tuesday, April 3, 2001 9:58 AM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

No comments

Dell Latitude C800 User Manual Page 40