Back to Contents Page
System Board
Dell™XPSM170ServiceManual
Removing the System Board
Replacing the System Board
Removing the System Board
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1. Follow the instructions in "Before Working Inside Your Computer."
2. Remove the hard drive.
3. Remove the optical drive.
4. Remove the memory module(s).
5. Remove the Mini PCI card.
6. Remove the modem.
7. Remove the center control cover.
8. Remove the keyboard.
9. Remove the display assembly.
10. Turn the computer over and disconnect the modem cable from the system board connector.
11. Disconnect the modem cable from the modem.
12. Remove the palm rest.
13. Remove the M2 x 3-mm screw that holds the stiffener bracket next to the hard drive cage and remove the stiffener bracket.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
Comments to this Manuals