Dell C6220 Owner's Manual download pdf (Page 238)

100

101

238 | Removing and Installing System Components

System Memory

Each system board has sixteen DDR3 memory module sockets for the

installation of up to sixteen unbuffered or registered DDR3-1333MHz

(1600MHz @2 memory modules per channel) memory modules to support

processor 1 and processor 2. See “C6220 II System Board Connectors” on

page 325 and “C6220 System Board Connectors” on page 326 for the

locations of the memory modules.

Memory Slot Features

 Support 8 channels, 16 UDIMMs/RDIMMs of DDR3

 Speed up to 1866MT/s

 Max. capacity: 512GB with 32GB RDIMM, LRDIMM

 Support DDR3/DDR3L

 Support ECC

NOTE: To operate under 1866MT/s requires Xeon E5-2600 v2 processor with 1.5v

RDIMM on 1 DPC.

Note: Linux operating system does not support the S4 (hibernation) mode.

Supported Memory Module Configuration

For the sequence of the sixteen memory-module sockets, see Figure 3-63.

The system requires at least one memory module installed on processor 1’s

DIMM slot 1 in order to be booted up. When you insert the memory

module(s), always start with CHA_A1. The optimized memory module

installation sequence is 1/2/3/4/5/6/7/8.

See Table 3-2 and Table 3-3 for possible memory configurations.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 348 349

Comments to this Manuals

No comments

Dell C6220 Owner's Manual Page 238

Comments to this Manuals

Related products and manuals for Motherboards Dell C6220