PowerConnect 8132, 8132F, 8164, and 8164F Rapid EqualLogic Configuration Series Implementation Guide Dell Product Group April 2013
2 PowerConnect 8132, 8132F, 8164, and 8164F Configuration Revisions Date Description November 2012 initial release April 2013 Updated for firmware v
3 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 1 Establish console access and configure switch To perform the configuration steps below
4 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 2 Configuring a Link Aggregation Group Dell recommends using QSFP (40 Gb) uplink module p
5 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 5. Configure LAG ports console(config)#interface range fortygigabitethernet 1/1/1-2 cons
6 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 3 LAG using four 10Gb Ethernet ports (optional): Note: If you already completed section 2
7 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 5. Configure LAG ports console(config)#interface range Tengigabitethernet 1/0/21-24 cons
8 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 4 Virtual stack configuration with QSFP ports (optional) Note: If you already completed s
9 PowerConnect 8132, 8132F, 8164, and 8164F Configuration 6. Configure the Out-of-Band management interface console(config)#interface out-of-band
Comments to this Manuals