Dell PowerEdge Expandable RAID Controller 3 User's Guide download pdf (Page 51)

Installing and Configuring Hardware 51

Determine whether the Dirty Cache LED on the controller is illuminated.

For location of the LED, see Figure 4-8

• If the LED is illuminated, replace the system cover, reconnect the

system to power, turn on the system, and repeat step 1 and step 2.

If the LED is not illuminated, continue with the next step.

Disconnect the data cables and battery cable from the PERC 6/i.

Remove any retention mechanism, such as a bracket screw, that might be

holding the PERC 6/i in the system, and gently lift the controller from the

system’s PCI-E slot.

Figure 4-8. Removing the PERC 6/i Adapter

1 bracket screw 3 dirty cache LED

2 PERC 6/i controller

Dell_PERC6.2_UG.book Page 51 Wednesday, June 24, 2009 6:08 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 159 160

No comments

Dell PowerEdge Expandable RAID Controller 3 User's Guide Page 51