Removing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand assembly.
2 Remove the back cover.
Procedure
1 Using the pull tab, slide the memory-module shield and remove it from
the system-board shield.
1 memory-module shield 2 system-board shield
2 Use your fingertips to spread apart the securing clips on each end of the
memory module connector until the memory module pops up.
30
Comments to this Manuals