Dell 3045 Owner's Manual download pdf (Page 32)

Replacing the Memory

Module(s)

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the notch on the memory module with the tab on the memory-

module connector.

2 Insert the memory module into the memory-module connector, and

press the memory module down until it clicks into place.

NOTE: If you do not hear the click, remove the memory module

and reinstall it.

NOTE: Use the memory module socket marked as DIMM2 if only

one memory module is in use.

1 notch 2 tab

3 Slide the tabs on the memory-module shield under the tabs on the

system-board shield until the memory-module shield is fully secured.

Postrequisites

1 Replace the back cover.

2 Replace the stand assembly.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

No comments

Dell 3045 Owner's Manual Page 32