Dell Compellent Series 30 User Manual download pdf (Page 30)

24 Storage Center System Setup Guide

Setting Up the Storage Center

Figure 18. iSCSI IO Card Configuration Warnings

3 For each iSCSI IO card, correct the IP Address, Subnet Mask, and/or Gateway IP

Address.

4 When you have finished, click Save Configuration. Go to Step 12: Configure Ports on

page 24.

Step 12: Configure Ports

The first dialog that appears for this step depends on whether the Virtual Ports feature is

licensed on the Storage Center.

If... Then...

Virtual Ports are Not Licensed

All transport types use Legacy Operational Mode. In this

case, the System Startup Wizard displays the Initial Port

Configuration dialog.

To continue, go to Step 12a: Configure Ports – Virtual Ports

Not Licensed on page 26.

Note In Legacy Mode, Fault Domains associate Primary

and Reserved Front End ports to one another. The

Primary and Reserved ports designate the port to

which traffic is moved in the event of a failover or

revert. Each Fault Domain requires a Primary and

Reserved port. Reserved ports do not carry data

unless a Primary port fails, thus only half the ports

are used.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

No comments

Dell Compellent Series 30 User Manual Page 30