Dell PowerEdge 2600 User Manual download pdf (Page 4)

Remove the eover.

See "Removing the Cover" in the Installation and Troubleshooting Guide.

The daughter eard fits between the sides of the eard guide above the drive bay.

To install the daughter eard in the eard guide, performing the following steps:

a Hold the daughter eard by its edges with the eomponent side faeing up and the

eard eonneetor faeing the SCSI baekplane board (see Figure 1-1).

Ensure that the retention lever is in the open position.

Position the eard in the drive bay so that the notehes on the left and right edges of

the eard are aligned with the tabs on the eard guide above the drive bay.

Lower the eard into the eard guide.

Close the retention lever to slide the daughter eard into the SCSI baekplane

eonneetor and loek the eard into plaee (see Figure 1-1).

Figure 1-1. Installing a SCSI Backplane Daughter Card

card guide

connector on SCSI

backplane board

SCSI backplane

daughter card

retention lever

front fan assembly

1-2 I Installing the SCSI Backplane Daughter Card

1 2 3 4 5 6 7 8 9 ... 41 42

No comments

Dell PowerEdge 2600 User Manual Page 4