Dell PowerEdge Rack Enclosure 4220 User Manual download pdf (Page 8)

Cable Routing Procedures for Dell™ PowerEdge™ R510 Systems

Page 6

Figure 6: Right-Side Mounted CMA Installation

Section 2: Cabling a Dell™ PowerEdge™ R510 System Without a CMA

NOTE: The CMA on Dell™ PowerEdge™ R510 systems is optional. Without the CMA installed, the

system must be powered down and all cables disconnected before it can be removed from the rack.

2.1 Routing the Cables

1. Connect all applicable cables to the rear of the system and verify that all connections are secure.

2. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to either

the left or right CMA attachment brackets as described in the Rack Installation Instructions. See

Figure 7 for an example of data cables secured to the left CMA bracket and power cables secured to

the right CMA bracket.

3. It is recommended that the cables be secured to the outer brackets, but cables may be secured to

the inner brackets as well if desired.

KVM dongle placed outside the basket

for Right-Side Mounting.

1 2 3 4 5 6 7 8 9 10 11

No comments

Dell PowerEdge Rack Enclosure 4220 User Manual Page 8