Dell PowerVault 122T LTO (Autoloader) User Manual download pdf (Page 33)

Back to Contents Page

OperatingtheAutoloader:Dell™PowerVault™122TLTO-2 Autoloader User's Guide

Operator's Panel Overview

Understanding the Menu Structure

Using Cartridges

Cleaning the Tape Drive

Creating an Inventory of Cartridges



Operator's Panel Overview

The Operator's Panel consists of four LEDs, four buttons, and a 2-line by 16-character LCD screen. The Operator's Panel provides everything you need to

monitor autoloader status and to control all of its functions.

The display defaults to the Home screen. The Home screen consists of the autoloader status on the top line and the current cartridge inventory on the second

line. If the tape drive does not have a cartridge loaded, the top line displays DELL PV-122T (see "Home Screen").

The cartridge inventory indicates all slots that contain a cartridge by displaying the slot number. Empty slots are indicated by a dash or hyphen (-).



Home Screen

An exclamation point (!) displayed in the inventory indicates that the autoloader has identified a cartridge in the indicated slot that is either invalid or has had

a media error. These conditions can be caused by faulty media, possibly due to a corrupt imbedded servo signal, or dirty read/write heads in the tape drive.

The Media Attention LED is also illuminated in this case (see "LED Indicators"). Exporting the indicated cartridge will clear the error condition (see "Exporting

Cartridges"). If these symptoms occur on multiple known good cartridges, consider cleaning the tape drive (see "Cleaning the Tape Drive"). If a particular

cartridge causes these symptom repeatedly, that cartridge may be defective or invalid.

Occasionally you may see the message In Transit, which indicates:

l An error condition has caused a cartridge to be left between its slot and the drive. (Power cycle or reset the autoloader to clear this condition.)

l A cartridge is unexpectedly found in the Import/Export slot opening. (Power cycle or reset the autoloader to clear this condition.)

You may also see the message SEQ in the lower-right corner of the display. This message indicates that the autoloader is currently running in Sequential mode

(see "Autoloader Operating Modes").

If the tape drive has a cartridge loaded, the top line displays Drive loaded

. The cartridge currently loaded in the drive is indicated by an alternating black block

and the slot number. This display can also indicate that the specified cartridge is being loaded, unloaded, imported, or exported, as well as indications of read

to, write to, and so on. The autoloader status line indicates the current operation. An example of this display is shown in the next section.

Home Screen, Drive Loaded



LED Indicators

The Operator's Panel includes four LED indicators that provide a variety of information as detailed in the following table:

LED

Color

Description

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Dell PowerVault 122T LTO (Autoloader) User Manual Page 33

Comments to this Manuals

Related products and manuals for Computer hardware Dell PowerVault 122T LTO (Autoloader)