Dell PowerVault NX3200 User Manual Page 21
- Page / 133
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Menu Item Description
Virtualization Technology Allows you to enable or disable the additional hardware capabilities provided for
virtualization. By default, the Virtualization Technology option is set to Enabled.
Adjacent Cache Line
Prefetch
Allows you to optimize the system for applications that require high utilization of sequential
memory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You
can disable this option for applications that require high utilization of random memory
access.
Hardware Prefetcher Allows you to enable or disable hardware prefetcher. By default, the Hardware Prefetcher
option is set to Enabled.
DCU Streamer Prefetcher Allows you to enable or disable Data Cache Unit streamer prefetcher. By default, the DCU
Streamer Prefetcher option is set to Enabled.
DCU IP Prefetcher Allows you to enable or disable Data Cache Unit IP prefetcher. By default, the DCU IP
Prefetcher option is set to Enabled.
Execute Disable Allows you enable or disable execute disable memory protection technology. By default,
the Execute Disable option is set to Enabled.
Number of Cores per
Processor
Allows you to control the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All.
Processor 64-bit Support Specifies if the processor(s) support 64-bit extensions.
Processor Core Speed Displays the maximum core frequency of the processor.
Processor Bus Speed Displays the bus speed of the processors.
NOTE: The processor bus speed option displays only when both the processors are
installed.
Processor 1
NOTE: The following settings are displayed for each processor installed in the system.
Family-Model-Stepping Displays the family, model and stepping of the processor as defined by Intel.
Brand Displays the brand name reported by the processor.
Level 2 Cache Displays the total L2 cache.
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.
SATA Settings Screen
Menu Item Description
Embedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID mode. By default, Embedded SATA
is set to AHCI Mode.
Port A Auto enables BIOS support for the device attached to SATA port A. By default, Port A is set to Auto.
Port B Auto enables BIOS support for the device attached to SATA port B. By default, Port B is set to Auto.
Port C Auto enables BIOS support for the device attached to SATA port C. By default, Port C is set to Auto.
21
- Dell PowerVault NX3200 1
- Owner's Manual 1
- Notes, Cautions, and Warnings 2
- Contents 3
- About Your System 9
- Diagnostic Indicators 10
- Hard-Drive Indicator Patterns 12
- NIC Indicator Codes 14
- Power Indicator Codes 14
- Getting Started Guide 16
- Choosing The System Boot Mode 17
- Entering System Setup 18
- System Setup Options 18
- System Setup Main Screen 19
- System BIOS Screen 19
- System Information Screen 19
- Memory Settings Screen 20
- Processor Settings Screen 20
- SATA Settings Screen 21
- Boot Settings Screen 22
- Integrated Devices Screen 22
- Serial Communications Screen 23
- System Security Screen 25
- Miscellaneous Settings 26
- Boot Manager Screen 29
- Embedded System Management 30
- Installing System Components 31
- Installing The Front Bezel 32
- Opening The System 32
- Inside The System 33
- Cooling Shroud 34
- System Memory 35
- Mode-Specific Guidelines 39
- Sample Memory Configurations 40
- Removing Memory Modules 42
- Installing Memory Modules 43
- Hard Drives 44
- Cooling Fans 47
- Installing A Cooling Fan 48
- PCIe Card Holder 51
- Cable Retention Bracket 53
- SD vFlash Card 63
- Internal Dual SD Module 66
- Internal SD Card 68
- Network Daughter Card 70
- Processors 71
- Removing A Processor 72
- Installing A Processor 75
- Power Supplies 76
- Hot Spare Feature 77
- Removing An AC Power Supply 77
- Installing An AC Power Supply 78
- Input Requirements 79
- Kit Contents 79
- Required Tools 79
- Required Wires 79
- Removing A DC Power Supply 81
- Installing A DC Power Supply 82
- System Battery 83
- Hard-Drive Backplane 84
- Control Panel 90
- Installing The Control Panel 91
- Removing The I/O Panel 91
- Installing The I/O Panel 92
- System Board 93
- Installing The System Board 95
- Troubleshooting Your System 97
- Troubleshooting A NIC 98
- Troubleshooting A Wet System 98
- Troubleshooting Cooling Fans 101
- Troubleshooting System Memory 101
- Troubleshooting An SD Card 102
- Troubleshooting A Hard Drive 104
- Troubleshooting Processors 106
- Using System Diagnostics 107
- System Diagnostic Controls 108
- Jumpers And Connectors 109
- System Board Connectors 110
- Technical Specifications 113
- System Messages 117
- Warning Messages 131
- Diagnostic Messages 131
- Alert Messages 131
- Getting Help 133
Related products and manuals for Computer hardware Dell PowerVault NX3200
Computer hardware Dell PERC 4/SI User Manual
(76 pages)
(76 pages)
(14 pages)© 2020, manymanuals.com. All rights reserved. | 0.214 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals