Dell PowerVault NX3200 User Manual download pdf (Page 53)

1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and

peripherals.

2. Open the system.

3. To open the PCIe card holder latch, press the tab.

4. To close the PCIe card holder latch, rotate the latch clockwise until it locks.

NOTE: Before installing a full-length PCIe card, the PCIe card holder latch must be closed. When the full-length

PCIe card is installed, open the PCIe card holder latch. Before removing the full-length PCIe card, you must close

the PCIe card holder latch.

Figure 20. Opening and Closing the PCIe Card Holder Latch

1. PCIe card holder

2. tab

3. PCIe card holder latch

5. Close the system.

6. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Cable Retention Bracket

Removing The Cable Retention Bracket

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your

warranty. Read and follow the safety instructions that came with the product.

1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and

peripherals.

2. Open the system.

3. Remove the cooling shroud.

4. Remove all cables routed through the cable retention bracket.

5. Press the tab and slide the cable retention bracket toward the front of the chassis to release it from the chassis.

6. Lift the cable retention bracket out of the chassis.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 132 133

No comments

Dell PowerVault NX3200 User Manual Page 53