Dell DR4000 User Manual download pdf (Page 116)

Access Controller (iDRAC).

--ip Static IP address to use.

--netmask Netmask for the assigned static IP address.

--gateway Gateway for routing.

--device Network device for iDRAC. By default, if you do not

specify a device, the iDRAC port will be used.

For example, to enable the remote access, you can run a similar command like the one below:

maintenance --remote_access --enable --static_ip --ip 10.250.241.167 --netmask

255.255.252.0 --gateway 10.250.240.1

Result

Successfully enabled remote access

maintenance --remote access [--disable]

Description

The command disables the iDRAC access (default: DHCP).

Syntax

maintenance --remote access --disable

Result

Successfully disabled remote access

maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag

<service tag>]

Description

Manages virtual disk drives.

• check_consistency — Starts vdisk consistency check.

• type — Type of the vdisk (boot/internal/external).

• service_tag — Service tag of the external storage.

Syntax

maintenance --vdisk --check_consistency --type internal

Result

Vdisk check: Successful.

maintenance --help

Description

Displays the list of maintenance-related options that can be used as a reference when using the DR Series system CLI.

Syntax

maintenance --help

Result

Usage:

maintenance --filesystem [--scan_status]

[--scan_report [verbose]]

[--repair_status [verbose]]

116

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 149 150

No comments

Dell DR4000 User Manual Page 116