Dell PowerVault MD1220 User Manual download pdf (Page 47)

Installing Enclosure Components 47

Installing the Backplane

Align the holes on the backplane with the holes on the enclosure.

Tighten the captive screw to secure the backplane to the chassis.

See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for

PowerVault MD1220.

Replace the screws that secure the backplane to the chassis.

See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for

PowerVault MD1220.

Align the slots on the EMM/power supply cage with the tabs on the

chassis. See Figure 3-13.

Push the EMM/power supply cage toward the front of the enclosure.

Replace the screws that secure the EMM/power supply cage to the chassis.

Replace the control panel. See "Installing the Control Panel" on page 44.

Replace the power supply/cooling fan modules. See "Installing a Power

Supply/Cooling Fan Module" on page 41.

Replace the hard drives. See "Installing a Hard Drive" on page 32.

Connect all the cables to the enclosure.

Turn on the enclosure and the host server.

book.book Page 47 Monday, December 7, 2009 4:51 PM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

No comments

Dell PowerVault MD1220 User Manual Page 47