Back to Contents Page
Display Assembly
Dell™Latitude™D520ServiceManual
Removing the Display Assembly
Display Bezel
Display Panel
Display Latch
Removing the Display Assembly
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the hinge cover (see Hinge Cover).
3. Remove the keyboard (see Keyboard).
4. Remove the captive screw that grounds the display cable.
5. Disconnect the display cable from the display cable connector on the system board.
6. Disconnect the three Mini-Card antenna cables (see Mini-Card).
7. Disconnect the antenna cables from the display by holding the two gold antenna connectors on each connector and gently pulling them apart.
8. Remove the four M2.5 x 5-mm screws from the display and remove the display from the computer.
Replacing the Display Assembly
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
Comments to this Manuals